Transmig 250I 240V Mig/Tig/Arc Inverter Kit

$1,982 AUD

($2,180 AUD GST Inclusive)

Seller confirm cost

Get a Finance Quote

Transmig 250I 240V Mig/Tig/Arc Inverter Kit Specification

  • Make : CIGWELD
  • Model : Transmig 250I 240V Mig/Tig/Arc Inverter Kit
  • Subcategory : Single Phase Multi-Process
  • Condition : New
  • Stock ID : W1003250



The CIGWELD TRANSMIG 250i is a self contained single phase multi process welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes. The unit is equipped with an integrated wire feed unit, voltage reducting device (VRD applicable in stick mode only), PFC (Power factor correction), digital voltage and amperage meters and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.

- Full multi process capabilities : GMAW/FCAW (MIG), MMAW (Stick), GTAW) TIG
- Standards Compliant, Voltage Reduction Device (VRD)
- Fully Compliant to AS 60974.1
- Digital voltage and amperage meters
- Enclosure rated to IP23S
- PFC ( Power Factor Correction)
- 3 year Limited Warranty

- Processes: MIG (GMAW/FCAW), Stick (MMAW), Lift TIG (GTAW)
- Supply Voltage: 240 volt AC +/15%, 50/60Hz (15A plug)
- Current Range: 10 - 250 amps
- Duty Cycle:
- MIG(GMAW/FCAW):250A40% (40C,10mins,)
- Stick(MMAW):230A40% (40C,10mins)
- TIG(GTAW):250A40% (40C, 10mins)
- Recommended Generator: 9.5 kVA for maximum welding current
- Weight Plant (packed): 42kg<
- Dimensions Plant: 630mm(H) x 378mm (W)705mm (D)

Plant Contents: TRANSMIG 250i inverter power source, Tweco Professional Fusion 250 MIG Torch 3.6m, COMET Professional Argo regulator/flowmetre, Feed Rolls: 0.9-1.2mm V Groove (fitted); 0.6-0.9m V Groove;1.2m V Groove; 1.2mm U Grove; Pressure Roll 0.6-1.2mm fitted), Contact tips: 0.8mm, 0.9mm (fitted), 1.0mm, 1.2mm, electrode holder with 4m lead, Work Clamp with 4m lead, shielding gas hose assembly, operating manual.



Ask a question